Automatic dispensing tap gun with counter
Automatic dispensing tap gun with counter  Automatic dispensing tap gun with counter  Automatic dispensing tap gun with counter  Automatic dispensing tap gun with counter  Automatic dispensing tap gun with counter 

Automatic dispensing tap gun with counter

  • Brand: VSO
  • Product Code: ZML-244
  • Availability: 98
  • 2,395 ₴


Qty

Automatic dispensing tap gun with meter 70 l/min

VSO dispensing tap meter (VS0700-006)

High-quality fuel dispensing gun with digital meter, specially designed for measuring liquid consumption when refueling motor vehicles, agricultural or construction equipment with fuel, diesel fuel, kerosene.

Built-in electronic meter allows you to control the volume of pumped fuel.

ATTENTION!!! The meter can show indicators from 1000 to 1500 l. All guns are tested at the factory.

Operating instructions:

  1. Two buttons: CALIBRATE and DISPLAY
  2. When changing the unit, press and hold the (CALIBRATE) button for 5 seconds, the numbers on the display will flash from left to right; press (DISPLAY) to go to the last position, the unit will flash from top to bottom, then press (CALIBRATE) to select the unit.
  3. Calibration: Press (CALIBRATE) and hold for 3 seconds, press (DISPLAY) or (CALIBRATE) to adjust. For example, when the meter shows 103L, and the actual pumped liquid is 100L, enter the value 103/100 = 1.0300. The computer display is programmed to return to standby mode after 5 seconds.
  4. Standby State: The standby state is a low power state; When there is a measuring pulse input, the real-time filling amount will be displayed.
  5. The measuring range is 9999.9, when exceeding this range, it will automatically reset to 0.
  6. Reset the real-time filling amount: Press the (DISPLAY) button to reset the real-time amount to 0. Reset the accumulated amount: Take out the battery, and when you insert the battery again, press and hold (DISPLAY) to reset the accumulated amount.
  7. The default real-time unit is liter (LRT).
  8. In the standby mode or when it shows the real-time filling amount, press (CALIBRATE) to display the cumulative filling amount.
  9. Release the (CALIBRATE) button or if there is a measuring pulse input, it will return to display the real-time filling amount.

Specifications

TECHNICAL CHARACTERISTICS

Flow rate, l/min 70

Inlet,"1

Nozzle diameter, mm 24

Operating temperature range: from -10 ° C to + 60 ° C.

DESCRIPTION

Product type Dispensing tap

Pumped liquids Diesel fuel; Kerosene

Country of origin Taiwan

Warranty period, months 18

 

Tags: Automatic dispensing tap gun with counter

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
0